Kokie yra produkto saugos užtikrinimo privalumai?

Išsamus teisinių reikalavimų laikymosi vertinimas ir papildomų aspektų, susijusių su produktų sauga, įtraukimas į vertinimo procedūras gali padėti: 

Kokie yra teisiniai reikalavimai?

REACH XVII priede apribojamas tam tikrų medžiagų naudojimas mišiniuose, kurie pateikiami plačiajai visuomenei, jeigu tų medžiagų koncentracija viršija nustatytas ribas. Visų pirma šie apribojimai taikomi medžiagoms, priskirtoms 1A arba 1B kategorijoms kaip kancerogeninės, mutageninės arba toksiškos reprodukcijai (CMR). XVII priede taip pat numatyti konkrečioms medžiagoms taikomi apribojimai, o ateityje gali būti įvesti papildomi apribojimai.

ES Bendroji produktų saugos direktyva, perkelta į nacionalinę teisę, numato, kad rinkoje esantys produktai neturėtų kelti jokios žalos vartotojams įprastomis ir numatomomis naudojimo sąlygomis. Šios direktyvos taikymo sritis apima visus produktus, skirtus vartotojams naudoti arba kuriuos pagrįstai galima laikyti skirtais vartotojams naudoti. Taigi šis teisės aktas taikomas visiems mišiniams, kurie laisvai parduodami rinkoje, įskaitant ir statybinių medžiagų parduotuves.

Nors teisės aktuose nėra nustatyta ar numatyta jokia konkreti rizikos vertinimo metodika, atitiktis konkretiems produktams taikomoms standartams laikoma viena iš saugos užtikrinimo priemonių. Tuo pačiu metu vartotojams skirtoms konkrečioms mišinių rūšims, pavyzdžiui, plovikliams ar kosmetikos gaminiams, taikomi papildomi reikalavimai, kurie trumpai aprašomi teisės aktų apžvalgoje.

Kaip reikėtų vertinti produkto saugą?

Compliance check

  • Does the mixture contain any restricted substances over permitted concentration limits? 
  • Is the classification of the mixture correct? 
  • Does the product label comply with all requirements?
  • Have the authorities been notified about the mixture?
  • Does the product conform to existing standards, e.g. under the construction products regulation?

Consumer risk assessment

To perform a qualitative assessment, consider the mixture’s classification, how it is normally used, and which exposures could occur. You may have to investigate this in more depth in the event that the hazards posed by substances and their exposure routes indicate potential risks at a qualitative level. 

In the qualitative assessment, anticipate the normal use of the mixture and identify all potential consumer exposures. Check if dermal contact is possible and which areas of the skin may be exposed and for how long. Consider if spills could come into contact with the eye. Assess whether substances in the mixture can be inhaled via aerosols, vapours or as dusts. Check ingestion possibilities, e.g. dishwashing agents remaining on dishes. 

To identify a risk, compare the exposure levels with the effect thresholds quantitatively. If the mixture contains a considerably hazardous substance and the user is most likely significantly exposed, in all probability you may immediately conclude that the risk is unacceptable and seek a substitute mixture.

Risk reduction measures for products

Substitution is the most far-reaching and effective risk reduction measure provided that alternatives are available that are less harmful. Hence, if there are concerns that a mixture could cause consumer risks, this should be the first measure to evaluate.

An example of risk reduction other than via the replacement of harmful chemicals can be drawn from the area of washing agents for textiles: instead of providing them in the form of powders, alternatives with lower exposure potential are liquids (no dusting, but risk of spills to the skin) or pre-packaged washing powder portions contained in packaging that dissolves in the washing machine (no dusting, no direct contact with the skin). 

Similar approaches exist in the transition from spray to foam applications or to design packaging whereby dosing or pouring is less prone to lead to skin exposure.

Žingsnis po žingsnio

Assign Product Safety Assessment Responsibilities

Identify staff who could implement a product safety assessment in terms of competences and resources; if competences are lacking. Identify options for training personnel to perform at least a qualitative risk assessment of products.

Prioritise Mixtures for Risk Assessment

Prioritise mixtures for risk assessment based on their classification and/or content of hazardous substances.

Define the Scope of the Product Safety Assessment

Define how comprehensive the product safety assessment should be: as a (legal) minimum, it must be assessed that the mixture does not cause any harm to the user in the course of normal and foreseeable use. Extensions of this scope could:

  • include environmental safety; 
  • assess product safety along the entire lifecycle, e.g. up and down the supply chain and regarding waste treatment;
  • assess the sustainability of a mixture, i.e. including non-toxic environmental impacts such as on climate change or resource use.

Carry Out and Document the Mixture Assessment

Carry out and document the assessment of one or more mixtures and identify if preventive actions are required. The assessment may start with a screening/qualitative approach and be refined if the results are ambiguous or are deemed to be as too rough for credible

Interpret Results and Implement Follow-Up Actions

Interpret the results:

  • if no action is needed, record the assessment and proceed to the next mixture; 
  • if action is required: inform the relevant staff of the assessment results and identify options to reduce risks. Monitor implementation and assess results. 

Daugiau išteklių

„ConsExpo“ – tai kompiuterinė programa, leidžianti įvertinti ir nustatyti medžiagų, esančių vartojimo prekėse, pavyzdžiui, dažuose, valymo priemonėse ir asmens higienos priemonėse, poveikį. Šį modelį sukūrė RIVM.

Šiame puslapyje ECETOC pristatoma kaip mokslinė, pelno nesiekianti organizacija, kuri suburia pramonės, akademinės bendruomenės ir vyriausybės ekspertus, siekdama kurti patikimus ir praktiškus sprendimus, skirtus cheminių medžiagų keliamų pavojų vertinimui ir valdymui.

REACH XVII priede pateikiami visi apribojimai, priimti pagal REACH ir ankstesnį teisės aktą – Direktyvą 76/769/EEB. Kiekviename įraše nurodyta medžiaga, medžiagų grupė arba mišinyje esanti medžiaga bei atitinkamos apribojimo sąlygos. Naujausioje konsoliduotoje REACH versijoje pateikiami apribojimai, priimti iki jos paskelbimo dienos. Vėlesni pakeitimai įtraukiami į Komisijos reglamentus, kuriais iš dalies keičiamas REACH reglamentas.